Pneumatic connection, port 1: Male thread M5
Pneumatic connection, port 2: For tubing outside diameter of 6 mm
Temperature-dependent operating pressure: -0.95 bar - 14 bar
Ambient temperature: -10 °C–80 °C
Nominal size : 2.1 mm
Pneumatic connection, port 1: Male thread R1/8
Pneumatic connection, port 2: For tubing outside diameter of 6 mm
Temperature-dependent operating pressure: :-0.95 bar to 14 bar
Ambient temperature: -10 °C to 80 °C
Nominal size: 4.2 mm
Piston diameter: 16 mm
Theoretical force at 6 bar, advancing 121 N
Stroke: 10 mm
Cushioning: Elastic cushioning rings/pads at both ends
Position sensing for the proximity sensor
Mode of operation: Double-acting
Piston diameter: 40 mm
Theoretical force at 6 bar, advancing: 754 N
Stroke: 250 mm
Cushioning : Pneumatic cushioning, adjustable at both ends
Piston diameter: 25 mm
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke:
295 N
Stroke: 80 mm
Cushioning: Elastic cushioning rings/plates at both ends
Position detection: Via proximity switch
It saves 20% space over the basic length of a corresponding ISO/VDMA cylinder
Low friction, long-life seals
High-strength, double-crimped end cap design
Standard magnetic piston for full control system versatility
aves 20% space over the basic length of a corresponding ISO/VDMA cylinder
Low friction, long-life seals
High-strength, double-crimped end cap design
Standard magnetic piston for full control system versatility
Mode of operation: Double-acting
Piston diameter: 32 mm
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke
: 482.5 N
Stroke: 250 mm
Cushioning : Self-adjusting pneumatic end-position cushioning
Mode of operation: Double-acting
Piston diameter: 25 mm
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke : 295 N
Stroke 50 mm
Cushioning: Elastic cushioning rings/plates at both ends
Pneumatic connection 1: For pneumatic tubing outside diameter 6 mm
Pneumatic connection 2 : for pneumatic tubing outside diameter 6 mm Temperature-dependent operating pressure: -0.95 bar to 14 bar
Ambient temperature: -10 °C to 80 °C
Nominal width: 4.3 mm
Valve function Unlockable, non-return function
Pneumatic connection 1: G1/4
Pneumatic connection 2 G2
Operating pressure: 0.5 bar to 10 bar
Type of mounting: Screw-in with an external thread
Mode of operation: Double-acting
Piston diameter: 32 mm
Theoretical force at 6 bar, advancing 483 N
Stroke: 80 mm
Cushioning Pneumatic cushioning, adjustable at both ends
Filter-pressure regulator Festo LFR-1/2-D-MAXI-MPA is a combination of compressed air preparation devices without an oil sprayer. For this equipment, the Festo line has a modern alternative: air treatment units of the MSB series.
ACH580 HVAC drive offering has all key features built-in to control fans, pumps and compressors, and more complex equipment like air-handling units and chillers, ensuring smooth, energy-efficient operation of your HVAC systems in normal and mission-critical situations. The built-in features significantly reduce installation time and the intuitive control panel with an HVAC-specific primary settings menu and help assistants makes startup, commissioning and operation easy. The optional Bluetooth® capability enables the commissioning and monitoring of the drive from a distance. The ACH580-01 comes in IP21 enclosure and can be installed on the wall as standard. Also, IP55 and flange mounting units are available.
690431950B0BF0P00A400
AC DRIVE
690+ SERIES
400-460 V
3-PHASE
4 KW
9.5 AMP OUTPUT CURRENT
FRAME B
BRAKE SWITCH FITTED
FILTER FITTED
NO SYSTEM BOARD
PANEL MOUNT
ENGLISH (50 HZ)
6901 KEYPAD FITTED
NO COMMS
Pneumatic connection 1: External thread R3/8
Pneumatic connection 2 : for pneumatic tubing outside diameter 8 mm
Temperature-dependent operating pressure: -0.95 bar to 14 bar
Ambient temperature: -10 °C to 80 °C
Nominal width: 6.7 mm